-40%

DSX 1DSX-1048 8 Door Package! Slight differences in each item's Enclosure!

$ 265.54

Availability: 10 in stock
  • Condition: Removed from working environment. Cleaned and fully tested. Slight differences in each item's Enclosure.
  • Model: DSX - 1048
  • Custom Bundle: No
  • MPN: DSX-1048
  • Brand: DSX Access Systems
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: United States

    Description

    Auction is for a
    USED
    DSX-1048
    Intelligent Controller. This includes the DSX-1040E enclosure, one DSX-1040CDM controller board for fused pwr output to the DSX-1042 door controller boards, each of which controls two doors two sets of dr contacts two sets of RTEs & two sets of aux inputs. Four DSX-1042 controllers are included, for 8 doors total. The unit HAS previously been installed, and was removed in working condition by a Master Certified Tech. Please be aware that the enclosure does have various knock-outs removed already. The enclosure may also be some what out of square (it may be bent slightly). It will, however shut & lock. Keys will NOT be included.
    ®DSX Access Systems, Inc.
    DSX-1048 Intelligent Controller
    Scalable Architecture 2-8 doors
    TCP/IP Communications
    Individual Intelligence
    512K RAM / 512K Flash ROM
    UL 294 / UL 1076
    260+ Card and Keypad Formats
    FIPS/TWIC Card Compatibility
    Real Time Processing and Communications
    Integrated Power Supply and Distribution
    DSX Access Systems, Inc.
    10731 Rockwall Road
    Dallas, Texas 75238
    888-419-8353
    www.dsxinc.com
    DSX-1048 Specifications
    Processor  AM186 20Mhz
    RAM/ROM Memory  Flash ROM 512K  Standard RAM 512K
    Communication Ports
    :
    DSX-1042
    RS-232 In 1 Master to PC
    RS-232 Out 1 Panel to DSX-1040CDM
    1040CDM
    RS-232 In 1 Master to DSX-1040CDM
    RS-232 Out 1 Slave Communications
    RS-485 In 1 From previous DSX-1048 Package
    RS-485 Out 1 To subsequent DSX-1048 Packages
    Power Requirements
    :
    DSX-1042 13.5 VDC @ 300ma from 1040CDM
    DSX-1040CDM 13.5 VDC @ 150ma from 1040PDP
    Total Maximum Current 13.5 VDC @ 6.0A
    Output Voltage
    Panel outputs provide a regulated, fused, DC voltage.
    DSX-1042 9-13.5VDC - 12VDC nominal - 1A Fused
    DSX-1040CDM 9-13.5VDC-12VDC nominal-1.5A Fused
    DSX-1040CDM 5VDC - .5A Fused
    All Outputs are Class 2, Power Limited
    Inputs
    :
    EOL Supervised 32
    16 Inputs are used for standard point monitoring.
    16 Inputs are used for door position and exit request monitoring.
    All Inputs support two, three, and four state monitoring with five programmable circuit types.
    Outputs
    :
    Form C Relays: 8
    Relay Output Ratings: 5 AMP - 30VDC
    Open Collector Outputs: 8 - negative 100ma
    LED Outputs: 24 - 3 per reader port - negative 100ma
    Pre-Alarm Outputs: 8 - 1 per door - negative 100ma
    Access Controlled Entry Points
    :
    Card Reader or Keypad 8
    Card and Reader Formats 260+ including FIPS/TWIC
    Any combination of card readers, keypads, or card and keypad controlled entry points may be used.
    Equipment Size
    :
    DSX-1040CDM 11" W x 4.5" H x 1.5" D
    DSX-1042         11" W x 4.5" H x 1.5" D
    Equipment Weight
    :
    DSX-1040CDM: 1.0 lb.
    DSX-1042          1.2 lb. each
    Enclosure Type
    :
    Nema Type 1 equivalent enclosure with lift-off hinged door, lock/key, and tamper switch.
    Enclosure Size
    DSX-1040E Cabinet: 15.5" W x 22.5" H x 6" D
    Enclosure Weight
    DSX-1040E Cabinet 19.2 lb.
    Finish
    Black Powder Coat with White Silkscreen on Enclosure and Black Enamel on DSX-1042.
    Conduit Knockouts
    Concentric knockouts in Top, Bottom, and Sides.
    Knockouts accommodate 1/2, 3/4, 1, 1 3/4 inch conduit.
    Temperature
    Operating 32 to 131 F
    Storage -35 to 150 F
    Humidity
    Operating 0 to 95%, relative
    Returns Not excepted, But all effort will be made to satisfy any problems. All boards tested before shipped.